at an angle造句

• the two lines are united at an angle of 45°.
  两线以45度角结合。
• We see that a physically possible wave pattern is an sv-wave incident at an angle .
  我们看到，一种物理上可能的波式样是一个以下列角度入射的SV波。
• The loosening holes outside the plough cut are also drilled at an angle which improves the breakage possibility .
  在楔形掏槽眼外侧的扩槽眼也要有角度以改善爆破效果。
• If a bay is inclined to the general line of the base at an angle of 10 mm in 24m, the error will be 0. 1 ppm .
  如果一个尺段偏离基线总方向的角度相应于24米距离上的10毫米，则误差为0110-6。
• Walk straight across and not at an angle
  应直步过马路，不要斜过。
• Never approach dolphins head on ; approach only at an angle
  切勿正面驶向海豚，应由旁边驶近。
• When we view a circle at an angle , we see an ellipse
  如果我们斜着看一个圆，我们看到的是椭圆。
• The famous tower of pisa leans at an angle
  有名的比萨塔是斜的
• Figure 1 : with the beam at an angle , area b is greater than area a
  图一当电筒倾斜时，区域b比区域a大。
• Do not lift at an angle
  举升时不得有倾斜（有角度） 。
• Polarization state of linear polarized light at an angle of incidence
  线偏振光电矢量与入射面有夹角入射时的偏振态
• An optical fiber whose end is deliberately polished at an angle to reduce reflections
  光纤的末端被磨成一个尖角以减少反射。
• Let s consider a wave that is coming at an angle , with the shoreline to its left
  假设浪从某一角度移近，而海岸线位于它的左面。
• Just hit the first qp at an angle and ollie at the top to make it to the other one
  以一定的角度进入一个qp ，在顶部跳起来后落在另一边。
• Two vertical mirrors inclined at an angle less than 90xare placed inside the windows
  窗内摆放了两面与地面垂直的地平镜，两者的夹角少于90度。
• Two vertical mirrors inclined at an angle greater than 90xare placed inside the windows
  窗内摆放了两面与地面垂直的平面镜，两者的夹角大于90 。
• We see that a physically possible wave pattern is an sv - wave incident at an angle
  我们看到，一种物理上可能的波式样是一个以下列角度入射的sv波。
• So she lifted up her voice at an angle calculated for distance and shouted : " y - o - u - u tom !
  于是她亮开嗓子朝远处，高声喊到： “汤姆呀，汤姆！ ”
• Press the toothbrush gently against the gum at an angle of 45 degrees , brush gently with a circular motion
  将牙刷以45度角压著牙肉，打圆圈轻轻地刷
• The sharp edge or ridge formed by two surfaces meeting at an angle , as in a molding
  尖脊两个平面以某种角度相接所形成的尖突的边或脊形，如铸模中的